QMI Inc. AIRSCAN INSTRUMENTS SCANNERS ULTRASONIC TESTING REQUESTS ADDRESSES

For Air-Coupled Non-Contact C-Scan Applications
· For non-destructive testing of advanced materials without contamination.
· Easy storage and retrieval of the test
setup parameters.
· Designed for through-transmission techniques.
SPECIFICATIONS |
|
TRANSMITTER - RECEIVER Bipolar Toneburst of up to 15 cycles per burst.Fine Tuning for nominal 50kHz, 120kHz, 225kHz, & 400kHz frequencies. Receiver Transducers feature integral super low-noise preamplifiers (600pV/root Hz) which provide 60dB gain. DISPLAY 7-inch diagonal flat-panel display of A-trace RF and Rectified Envelope – includes menu function display on screen at all times. FRONT PANEL CONTROLS Gain, Gate, Range, Attenuation, Transmit Cycles, Alarms, Independent Receiver & Transmitter Control, And File Functions. DIGITAL CONTROL Embedded Computer. REAR PANEL Line Power –
with replaceable fuse.
|
POWER REQUIREMENTS 110-120 VAC, 5 amp/ 220VAC, 2.5 amp. ENVIRONMENTAL -20° to 100° F PHYSICAL
*New
14.375” L X 14.375” W X 5.75” H – WT. 19.5Lb. SYSTEM CONFIGURATIONS The SONDA-007CX® may be used with the following: · All QMI Scanning systems. · Existing Water-Jet scanning systems. · Existing data acquisition and motion control software.
·
Winspect® data
acquisition and motion control ACCESSORIES · AS50Ai 50kHz Airscan Transducers · AS120Ai 120kHz Airscan Transducers · AS225Ai 225kHz Airscan Transducers · AS400Ai 400kHz Airscan Transducers
|